BERETTA SHOTGUN PARTS-COCKING HANDLE PLUNGER SPRING C95324

COCKING HANDLE PLUNGER SPRING

SCHEMATIC REFERENCE – 84, 114 - Xtrema84, A400114, TX4114, 1301COMP114, 1301TACTICAL114, A400L C114, A400LS114, A400LS20114, A400UP114, A400XM114, A400XP114, A400XS114, A400XS20114, A400BE114, A400XA114, A400XA20114,  A400XAS114

PART NUMBER - C95324

Beretta shotgun part COCKING HANDLE PLUNGER SPRING forXtrema, A400, TX4, 1301COMP, 1301TACTICAL, A400LC, A400LS, A400LS 20, A400UP, A400XM, A400XP, A400XS, A400XS20, A400BE, A400XA, A 400XA20, A400XAS

The COCKING HANDLE PLUNGER SPRING in a Beretta shotgun applies pressure to the cocking handle plunger for positive engagement to keep the handle secure. It is made of steel and is used in 300 Series, 390, 391, 3901, A300 Outlander and A300 Ultima, A400 Series shotgun models chambered in 12 or 20 gauge. This part will also fit the Browning B-80 shotgun model.

BERETTA SHOTGUN A400 MODEL CODES:
Beretta Shotgun A400XA Xplor Action
Beretta Shotgun A400XAS Xplor Action Left
Beretta Shotgun A400XS Xcel Sporting
Beretta Shotgun A400XM Xcel Multitarget
Beretta Shotgun A400XP Xcel Parallel Target
Beretta Shotgun A400UP Upland
Beretta Shotgun A400LC Lite Comp
Beretta Shotgun A400LS Lite Synthetic
Beretta Shotgun A400UL Ultra Lite
Beretta Shotgun A400BE Black Edition

It is important to clean your Beretta semi-automatic
shotgun clean. See How Casey Cleans a Beretta Semi-Auto Shotgun. Below are some simple tips:

NOTE: It is recommended that all BERETTA PARTS be installed by a QUALIFIED and trained gunsmith.

Cole Gunsmithing Service Work Order Request Form

     It is important to clean your Beretta semi-automatic shotgun. According to Beretta, it is recommended that you clean your shotgun after each shooting session. It is important not to oil the gas system (piston, piston valve, elastic piston ring, or body that is attached to barrel) as this will create carbon buildup - just keep this area clean.

Beretta Shotgun Semi-Auto Cleaning Tutorial.
Below are some quick simple tips:
1. Make sure your gun is UNLOADED and the action is EMPTY to avoid accidental discharge and the barrel is pointed in a safe direction.
2. Field strip your shotgun.
3. Clean the bore, clean the gas ports, clean the choke tube threads occasionally, wipe off the rest of it.
4. Soak the bolt assembly and the trigger assembly occasionally for about 15 minutes, about every 2,000 rounds or so.
5. Spray the piston, elastic piston seal and magazine tube with Beretta Gun Oil.
6. Ensure that the piston glides freely on the magazine tube.
7. To clean the walls of the gas cylinder, spray the walls with Beretta Gun Oil and clean thoroughly with a bronze brush.
8. GREASE APPROPRIATE CONTACT POINTS                             

9. Shotgun reassembly.
10. Check the controls of your shotgun.
11. Spray the gun with gun treatment and let it sit, then wipe

    CLEAN YOUR SEMI-AUTOMATIC LIKE A PROFESSIONAL GUNSMITH.

BUY OUR CUSTOM SEMI-AUTO CLEANING KIT

BUY YOUR SHOTGUNS FROM THE WORLDS LARGEST BERETTA PREMIUM SHOTGUN DEALER!