SCHEMATIC REFERENCE – 66, 80 – A30066, A30166, A30266, A30366, A30480, A39080
PART NUMBER – C52026
SCHEMATIC REFERENCE – 44, 80 – XTREMA44, A39180, AL39180, A391LIGHT80
PART NUMBER – C58972
Beretta shotgun part SEAR for A300, A301, A302, A303, A304, A390, XTREMA, A391, AL391, A391LIGHT
In a Beretta semi-automatic shotgun, the sear is a fundamental component of the firearm's firing mechanism, and its role is central to the safe and precise operation of the shotgun. The sear is a small but critical part that interacts with the hammer, trigger, and other components to ensure controlled firing.
The primary function of the sear is to hold the hammer in a cocked position until the shooter pulls the trigger. When the trigger is squeezed, it engages with the sear, causing it to release the hammer. This, in turn, allows the hammer to strike the firing pin, which ignites the primer in the shotgun shell and initiates the firing sequence.
The sear's importance lies in its role as a safety feature. It prevents the hammer from falling prematurely and firing a round unintentionally. Without a properly functioning sear, a shotgun could become dangerously prone to accidental discharges, posing a significant risk to the shooter and those in the vicinity.
Additionally, the sear contributes to the shotgun's trigger control and accuracy. It ensures that the trigger pull is consistent and predictable, enhancing the shooter's ability to place accurate shots. In a semi-automatic shotgun like a Beretta, this consistency is essential for rapid follow-up shots and effective target engagement.
In summary, the sear in a Beretta semi-automatic shotgun is a vital component that ensures the firearm's safe and precise operation. Its role in holding the hammer in check until the shooter pulls the trigger helps prevent accidental discharges, while also contributing to trigger control and overall accuracy. As such, the sear is a critical part of the firearm's firing mechanism, embodying the principles of safety and precision that are paramount in the design of any firearm.
NOTE: It is recommended that all BERETTA PARTS be installed by a QUALIFIED and trained gunsmith.
Cole Gunsmithing Service Work Order Request Form CLICK HERE
It is important to clean your Beretta semi-automatic shotgun. According to Beretta, it is recommended that you clean your shotgun after each shooting session. It is important not to oil the gas system (piston, piston valve, elastic piston ring, or body that is attached to barrel) as this will create carbon buildup - just keep this area clean.
Let Cole Gunsmith Casey show you how a professional gunsmith cleans a Beretta semi-automatic shotgun. Beretta Shotgun Semi-Auto Cleaning Tutorial. CLICK HERE
BELOW ARE SOME QUICK SIMPLE TIPS:
1. ALWAYS make sure the barrel is pointed in a safe direction.
2. Make sure your gun is UNLOADED and the action is EMPTY to avoid accidental discharge.
3. Field strip your shotgun.
4. Clean the bore, clean the gas ports, clean the choke tube threads occasionally, wipe off the rest of it.
5. Soak the bolt assembly and the trigger assembly occasionally for about 15 minutes, about every 2,000 rounds or so.
6. Spray the piston, elastic piston seal and magazine tube with Beretta Gun Oil.
7. Ensure that the piston glides freely on the magazine tube.
8. To clean the walls of the gas cylinder, spray the walls with Beretta Gun Oil and clean thoroughly with a bronze brush.
9. GREASE APPROPRIATE CONTACT POINTS SHOTGUN GREASE CLICK HERE
10. Shotgun reassembly.
11. Check the controls of your shotgun.
12. Spray the gun with gun treatment and let it sit, then wipe.
CLEAN YOUR SEMI-AUTOMATIC LIKE A PROFESSIONAL GUNSMITH BUY OUR CUSTOM SEMI-AUTO CLEANING KIT CLICK HERE
Buy shotguns and shotgun parts from the World’s Largest Beretta Premium Shotgun Dealer!
How to contact Cole Gunsmithing
Option 1 Naples, Florida
Option 2 Harpswell, Maine
Option 3 San Antonio, Texas