BERETTA SHOTGUN PARTS-72-COCKING HANDLE

COCKING HANDLE

SCHEMATIC REFERENCE – 27, 56, 72 – A300027, A30056, A30472, A39072, A39172, AL39172, A391LIGHT72

PART NUMBER - C58933 - 12 gauge

SCHEMATIC REFERENCE – 56, 72 – A30056, A39172, A391LIGHT72

PART NUMBER - C59139 - 20 gauge

Beretta shotgun part COCKING HANDLE for A3000, A300, A304, A390, A391, AL391, A391LIGHT
The COCKING HANDLE on a Beretta shotgun is used to manually cycle the bolt, which loads the next round into the chamber and ejects the spent shell casing from the previous round. It is also used to disassemble the shotgun for cleaning and maintenance purposes.If you are looking for a replacement cocking handle for your Beretta shotgun, you are at the right place. Cole Gunsmithing is your one stop shop for premium shotgun parts.

NOTE: It is recommended that all BERETTA PARTS be installed by a QUALIFIED and trained gunsmith.
Cole Gunsmithing Service Work Order Request Form CLICK HERE FOR A WORK ORDER

It is important to clean your Beretta semi-automatic shotgun. According to Beretta, it is recommended that you clean your shotgun after each shooting session. It is important not to oil the gas system (piston, piston valve, elastic piston ring, or body that is attached to barrel) as this will create carbon buildup - just keep this area clean.
Let Cole Gunsmith Casey show you how a professional gunsmith cleans a Beretta semi-automatic shotgun. Beretta Shotgun Semi-Auto Cleaning Tutorial.

Below are some quick simple tips:
1.ALWAYS make sure the barrel is pointed in a safe direction.
2.Make sure your gun is UNLOADED and the action is EMPTY to avoid accidental discharge.
3.Field strip your shotgun.
4.Clean the bore, clean the gas ports, clean the choke tube threads occasionally, wipe off the rest of it.
5.Soak the bolt assembly and the trigger assembly occasionally for about 15 minutes, about every 2,000 rounds or so.
6.Spray the piston, elastic piston seal and magazine tube with Beretta Gun Oil.
7.Ensure that the piston glides freely on the magazine tube.
8.To clean the walls of the gas cylinder, spray the walls with Beretta Gun Oil and clean thoroughly with a bronze brush.
9. GREASE APPROPRIATE CONTACT POINTS
10. Shotgun reassembly.
11. Check the controls of your shotgun.
12. Spray the gun with gun treatment and let it sit, then wipe.
CLEAN YOUR SEMI-AUTOMATIC LIKE A PROFESSIONAL GUNSMITH
BUY OUR CUSTOM SEMI-AUTO CLEANING KIT CLICK HERE

COLE GUNSMITHING IS THE WORLDS LARGEST BERETTA PREMIUM SHOTGUN DEALER

How to contact Cole Gunsmithing
800 650-2653
Option 1 Naples, Florida
Option 2 Harpswell, Maine
Option 3 San Antonio, Texas