BERETTA SHOTGUN PARTS-EXTRACTOR PIN 303/390/391 C92154 12 gauge and 20 gauge

EXTRACTOR PIN PLUNGER

SCHEMATIC REFERENCE -53bis, 71, 105 – A30053bis, A30471, A39071, A39171, AL39171, A391LIGHT71, A3000105
PART NUMBER - C92154 - 12 gauge and 20 gauge

Beretta shotgun part EXTRACTOR PIN PLUNGER for A300, A304, A390, A391, AL391, A391LIGHT, A3000

The Extractor Pin Plunger is a part of the extractor assembly in a Beretta semi-automatic shotgun. It is responsible for holding the extractor pin in place and ensuring that it functions properly. The extractor pin, in turn, is responsible for removing the spent shell from the chamber of the shotgun after it has been fired.
If the extractor pin plunger is damaged or not functioning correctly, it can cause issues with the extraction process and lead to malfunctions.

NOTE: It is recommended that all BERETTA PARTS be installed by a QUALIFIED and trained gunsmith.
Cole Gunsmithing Service Work Order Request Form

It is important to clean your Beretta semi-automatic shotgun. According to Beretta, it is recommended that you clean your shotgun after each shooting session. It is important not to oil the gas system (piston, piston valve, elastic piston ring, or body that is attached to barrel) as this will create carbon buildup - just keep this area clean.
Let Cole Gunsmith Casey show you how a professional gunsmith cleans a Beretta semi-automatic shotgun. Beretta Shotgun Semi-Auto Cleaning Tutorial.

Below are some quick simple tips:
1.ALWAYS make sure the barrel is pointed in a safe direction.
2.Make sure your gun is UNLOADED and the action is EMPTY to avoid accidental discharge.
3.Field strip your shotgun.
4.Clean the bore, clean the gas ports, clean the choke tube threads occasionally, wipe off the rest of it.
5.Soak the bolt assembly and the trigger assembly occasionally for about 15 minutes, about every 2,000 rounds or so.
6.Spray the piston, elastic piston seal and magazine tube with Beretta Gun Oil.
7.Ensure that the piston glides freely on the magazine tube.
8.To clean the walls of the gas cylinder, spray the walls with Beretta Gun Oil and clean thoroughly with a bronze brush.
9. GREASE APPROPRIATE CONTACT POINTS  CLICK HERE TO VIEW OUR GREASE
10. Shotgun reassembly.
11. Check the controls of your shotgun.
12. Spray the gun with gun treatment and let it sit, then wipe.
CLEAN YOUR SEMI-AUTOMATIC LIKE A PROFESSIONAL GUNSMITH
BUY OUR CUSTOM SEMI-AUTO CLEANING KIT
Buy shotguns and shotgun parts from the Worlds Largest Beretta Premium Shotgun Dealer!

COLE GUNSMITHING IS THE WORLDS LARGEST BERETTA PREMIUM SHOTGUN DEALER

How to contact Cole Gunsmithing
800 650-2653
Option 1 Naples, Florida
Option 2 Harpswell, Maine
Option 3 San Antonio, Texas