BERETTA SHOTGUN PARTS-EJECTOR STOP SPRING PIN 400 SHOTGUN 12 GAUGE 20 GAUGE C97263

EJECTOR STOP SPRING PIN

SCHEMATIC REFERENCE – 59, 73 – A40059, TX459, 1301COMP59,
1301TACTICAL59, A400LS59, A400UL59, A400UP59, A400XM59, A400XP59, A400XS59, A400BE59, A400XA59, A400XAS59, XTREMA73
PART NUMBER - C92287 FITS: 1301 Tactical, 12 Gauge; A300 Xtrema, 12 ga; A391-Xtrema, 12; 12 Ga; A400 Lite, 12; A400 Xtreme, 12; TX4, 12

SCHEMATIC REFERENCE – 59 – A400LC59, A400LS2059, A400XS2059, A400XA2059, A400XA2859
PART NUMBER - C97263 FITS: A400 Xcel, 12/20; A400 Xcel Multi-Target, 12; A400 Xplor/Action 12/20 3" Chamber

Beretta shotgun part EJECTOR STOP SPRING PIN for A400, TX4, 1301COMP, 1301TACTICAL, A400LS, A400UL, A400UP, A400XM, A400XP, A400XS, A400BE, A400XA, A400XAS, XTREMA, A400LC, A400LS20, A400XS20, A400XA20, A400XA28

Note: It is recommended that all BERETTA PARTS be installed by a QUALIFIED and trained gunsmith.
Cole Gunsmithing Service Work Order Request Form

BERETTA SHOTGUN A400 MODEL CODES:
Beretta Shotgun A400BE Black Edition
Beretta Shotgun A400LC Lite Comp
Beretta Shotgun A400LS Lite Synthetic
Beretta Shotgun A400UL Ultra Lite
Beretta Shotgun A400UP Upland
Beretta Shotgun A400XA Xplor Action
Beretta Shotgun A400XAS Xplor Action Left
Beretta Shotgun A400XM Xcel Multitarget
Beretta Shotgun A400XP Xcel Parallel Target
Beretta Shotgun A400XS Xcel Sporting
Beretta Shotgun A400 Xtreme Xtrema

It is important to clean your Beretta semi-automatic shotgun. According to Beretta, it is recommended that you clean your shotgun after each shooting session. It is important not to oil the gas system (piston, piston valve, elastic piston ring, or body that is attached to barrel) as this will create carbon buildup - just keep this area clean.

Beretta Shotgun Semi-Auto Cleaning Tutorial.
Let Cole Gunsmith Casey show you how a professional gunsmith cleans a Beretta semi-automatic shotgun

Below are some quick simple tips:
1. Make sure your gun is UNLOADED and the action is EMPTY to avoid accidental discharge and the barrel is pointed in a safe direction.
2. Field strip your shotgun.
3. Clean the bore, clean the gas ports, clean the choke tube threads occasionally, wipe off the rest of it.
4. Soak the bolt assembly and the trigger assembly occasionally for about 15 minutes, about every 2,000 rounds or so.
5. Spray the piston, elastic piston seal and magazine tube with Beretta Gun Oil.
6. Ensure that the piston glides freely on the magazine tube.
7. To clean the walls of the gas cylinder, spray the walls with Beretta Gun Oil and clean thoroughly with a bronze brush.
8. Shotgun reassembly.
9. Check the controls of your shotgun.
10. Spray the gun with gun treatment and let it sit, then wipe

CLEAN YOUR SEMI-AUTOMATIC LIKE A PROFESSIONAL GUNSMITH BUY OUR CUSTOM SEMI-AUTO CLEANING KIT