BERETTA SHOTGUN PARTS-57-O RING ADJUSTABLE RIB

O RING ADJUSTABLE RIB

SCHEMATIC REFERENCE – 57 – A40057, A300057, A400UL57, A400UP57, A400XM57, A400XP57, A400XS57, A400XS2057, A400BE57, A400XA57, A400XA2057, A400XAS57, A400XA2857
PART NUMBER - C5D334

SCHEMATIC REFERENCE – 8, 57 – XTREMA8, TX457, 1301COMP57, 1301TACTICAL57, A400LS57
PART NUMBER - C5A038

SCHEMATIC REFERENCE – 57 – A400LC57, A400LS2057
PART NUMBER - C9A042

Beretta shotgun part O RING ADJUSTABLE RIB for A400, A3000, A400UL, A400UP, A400XM, A400XP, A400XS, A400XS20, A400BE, A400XA, A400XA20, A400XAS, A400XA28, XTREMA, TX4, 1301COMP, 1301TACTICAL, A400LS,
A400LC, A400LS20

An adjustable rib allows you to precisely adjust point of impact with the same sight picture. It is anchored at the receiver end and adjusts at the muzzle end. It helps with your fit in the gun by helping you align your eye to the rib at the receiver end.

Note: It is recommended that all BERETTA PARTS be installed by a QUALIFIED and trained gunsmith.
Cole Gunsmithing Service Work Order Request Form

BERETTA SHOTGUN A400 MODEL CODES:
Beretta Shotgun A400BE Black Edition
Beretta Shotgun A400LC Lite Comp
Beretta Shotgun A400LS Lite Synthetic
Beretta Shotgun A400UL Ultra Lite
Beretta Shotgun A400UP Upland
Beretta Shotgun A400XA Xplor Action
Beretta Shotgun A400XAS Xplor Action Left
Beretta Shotgun A400XM Xcel Multitarget
Beretta Shotgun A400XP Xcel Parallel Target
Beretta Shotgun A400XS Xcel Sporting
Beretta Shotgun A400 Xtreme Xtrema

It is important to clean your Beretta semi-automatic shotgun. According to Beretta, it is recommended that you clean your shotgun after each shooting session. It is important not to oil the gas system (piston, piston valve, elastic piston ring, or body that is attached to barrel) as this will create carbon buildup - just keep this area clean.

Let Cole Gunsmith Casey show you how a professional gunsmith cleans a Beretta semi-automatic shotgun.

Beretta Shotgun Semi-Auto Cleaning Tutorial.
Below are some quick simple tips:
1. Make sure your gun is UNLOADED and the action is EMPTY to avoid accidental discharge and the barrel is pointed in a safe direction.
2. Field strip your shotgun.
3. Clean the bore, clean the gas ports, clean the choke tube threads occasionally, wipe off the rest of it.
4. Soak the bolt assembly and the trigger assembly occasionally for about 15 minutes, about every 2,000 rounds or so.
5. Spray the piston, elastic piston seal and magazine tube with Beretta Gun Oil.
6. Ensure that the piston glides freely on the magazine tube.
7. To clean the walls of the gas cylinder, spray the walls with Beretta Gun Oil and clean thoroughly with a bronze brush.
8. Shotgun reassembly.
9. Check the controls of your shotgun.
10. Spray the gun with gun treatment and let it sit, then wipe

CLEAN YOUR SEMI-AUTOMATIC LIKE A PROFESSIONAL GUNSMITH.  BUY OUR CUSTOM SEMI-AUTO CLEANING KIT